Recycled Plastic Decking

Create smart surfaces with decking engineered from our durable and weatherproof, 100% British recycled plastic.

Recycled plastic decking is the maintenance-free solution for building a wide variety of structures.

Decked areas in private gardens, fishing pegs, boardwalks, cycleways, viewing and pond-dipping platforms are all well-suited uses of our durable recycled decking boards. 

Any structure built from our decking will be impervious to frost, algae, salt and fuel spills. We’re so certain of its quality and durability that we offer a 25-year guarantee.

Recycled plastic decking is often used in domestic settings to ensure a non-slip surface. Timber decking commonly accumulates a build-up of slippery algae over the course of the autumn and winter, requiring annual jet washing. You can tick that task off your list by choosing our decking boards. As our materials are guaranteed, you’ll never need to repair or replace, either.

Achieving value for money is a key consideration for any purchase and, as our recycled plastic is completely rot-proof and splinter-free, the total-life costs of recycled plastic are considerably lower than its timber equivalent.

Showing all 2 results

product top bar
Once they’ve been delivered, how do I store the boardwalk parts before I assemble them?

Recycled plastic boardwalk parts should always be stored laid flat on delivery, until you assemble them.

What kind of tools to I need to use to work the recycled plastic?

It can be cut and drilled like hardwood, but please be aware that this means you will go through blades and drill bits more quickly than if you were working with treated pine.

Can the recycled plastic lumber be worked like wood?

In many scenarios, recycled plastic lumber can be worked like hardwood, however it is worth noting that it should never be cut lengthwise.  This is to do with differing tensions between the “skin” of the recycled plastic and the inside. Nor should deep notches over 50% of the width of the plank be cut into it.  Cutting a notch into a lumber plank weakens it as would be the case with timber.  Therefore if notched planks are integral to your design, we suggest this is only as part of a finished product which remains static, ie. not something which is regularly moved or dismantled.

For an elevated structure, what should I use for posts and how far apart should they be?

We strongly recommend using 100x100mm posts (RPL005) spaced at a maximum of 1.5 metres apart, centre to centre.

Can you calculate how many planks and of what size I need to make something if I give you the overall measurements?

No, sorry. You will need to do your own workings out based on what you need and using our price and product list for the sizes.

Can you supply planks cut to size?

Yes, we can cut your material to your specified sizes for a small charge (see price list).

Is there an easy way to work out how many decking planks I need to cover a surface?

Allowing for a 10mm gap between boards, each decking plank can be roughly counted as half a square metre.

How far apart do the stringers under decking planks need to be to create a surface that isn’t too springy?

500mm centres are fine.

Do you have any drawings that I can use for guidance?

We have a number of drawings you might like to look at here.

Do the decking boards need to be laid in a particular direction?

The grooves on the surface should always be laid across the direction that people will walk. Where used over water, the grooves should always be parallel to the bank.

Can I screw directly into the recycled plastic?

It is difficult and can be frustrating. We always advise drilling a pilot hole.

Can you give me a price to design and install a recycled plastic boardwalk?

I’m afraid we don’t design and install ramps, platforms or boardwalks. We just manufacture and supply the boards.
Our recycled plastic does, however, cut and perform in a similar manner to hardwood planks, so the people you would normally use to make this if it were wood should be able to construct it from recycled plastic.
We would be happy to give you a price for the material and can cut it to size if you would like to supply a list of the planks you need. We are also happy to talk to any installers/joiners/volunteers on the phone if they would like additional support.

The wooden boardwalk we have has rotted and become dangerous in under ten years. How long will yours last?

We’d expect it to last several decades, probably 40-75 years if you build it well.

What sort of fixings should I use?

We would strongly recommend using stainless steel bolts and screws for any recycled plastic structure, whether boardwalks, platforms or anything else, otherwise the fixings will need replacing long before the planks, rails and posts.

Decking Project by Glyn Jones

Check out this gorgeous customer-built decking project. Glyn Jones has done a cracking job - and he's rightfully proud of it! Glyn was replacing his old, rotted timber decking - an area of 6.5m x 3m. After preparing the area, he laid a weed-stopping membrane. He used...

read more

Accessible fishing peg

This accessible fishing peg was built from our recycled plastic lumber decking. It's a joint venture between Bideford & District Angling Club and the British Disabled Angling Association (BDAA). Here's what they had to say about the build: "We were planning to...

read more

Any questions? Contact us.

Our team of support specialists are available to discuss your project needs and offer technical support and sales advice.

Call us on 01422 419 555 or complete the form by clicking the link below: